FTTH Tool Kit Fiber Optic Termination 30MW Visual Fault Locator ‑70~+10dBm Power Meter Cleaver FC to LC Adapter Stripper Item Type: FTTH Tool Kit AUA M7 Optical Power Red Light Meter: Test Range: -70~+10dBm Wavelength Range: 850-1650nm Standard Wavelength(nm): 850, 980, 1270, 1300, 1310, 1490, 1550, 1577, 1625, 1650 Display Resolution: Linear Display: 0.1%; Logarithmic Display: 0.01dBm Power Supply: 2 x AAA lithium battery(not include) Output Wavelength: 650nm Output Optical Power: >30MW AUA 30 Fiber Optic Red Light Pen: Output Optical Power: >30MW Universal Interface: Approx. 2.5mm / 0.1in(FC, SC, ST) Output Wavelength: 650nm±10nm Fiber Optic Adapter: Universal connector Battery Type: 2 x AA alkaline battery(not include) FC 7S Fiber Cutter: Cutting Angle: ≤0.5° Applicable Bare Fiber Diameter: 125μm Fiber Cutting Length: 9 ~ 16mm / 0.35 ~ 0.63in(dia 0.25mm) or 10 ~ 16mm / 0.39 ~ 0.63in(dia 0.25mm) Number of Cuts: 36,000 Three Mouth Stripping Pliers: Large hole for peeling 2mm to 3mm(outer protective layer of optical fiber) Middle hole for stripping 900μm-250μm(white soft rubber protective layer of fiber core) Small hole for stripping 250μm to 125μm(coating of fiber core) Wire Stripper: Adaptive Fiber: 1/2 Core fiber Adaptive Range(WxH): Indoor Approx. 30 x 2mm / 1.18 x 0.08in cable Optical Fiber Adaptive Coating Diameter: Dia 0.25mm and dia 0.9mm Adaptive Cladding Diameter of Optical Fiber: 125μm