Item Type: Pressure Transducer Output Signal: 0.5-4.5V (Linear Voltage Output) Thread: G1/4 Response Time: <2ms Accuracy: Within 2 percent of Reading (full scale) Power Supply Voltage: 5-12V Rated Pressure Range: 1Mpa Burst Pressure: 3 Times Rated Pressure Overload Pressure: 2 Times Rated Pressure Operating Temperature: -40℃ to 125℃ 1,Applicable Range: This pressure transmitter can be used to detect oil, fuel, air, and water pressure, and widely used in oil tank, gas tank, fuel tank, etc. 2,G1/4 Thread Connector: This pressure transducer sender has a standard G1/4 threaded connector, to ensure stable connection without air leakage. 3,Durable Material: The pressure sensor adopts stainless steel body and ceramic pressure chip, which has stable performance and a long service life. 4,Good Performance: This pressure transmitter has 1Mpa rated pressure, ±2 percent FS small output error, quick response, high sensitivity and high accuracy. 5,Voltage Protection: The stainless steel pressure transducer has complete surge voltage protection function, ensuring safe and reliable operation.1. Choose an easy operation and maintain location for installation. 2. Install as far away from sources of vibration as possible. 3. Install it as far away from heat sources as possible. 4. It is best to connect it to the measurement pipeline through a valve. 5. When installing, use a wrench to tighten it at the hex of the transmitter.1 x Pressure Transducer