nThe product is shipped based on the color or size of the main image of the product page.Colour:Dark GreyOrigin: CN(Origin) 1 The device is a Bluetooth wireless left and right small handle which has similar functions to the SWITCH original Joy-Con small handle. Both the left handle and the handle can be operated as a separate handle. Any key (except L3 R3) wakes up and supports plugging and unplugging with the host Automatic matching handle with six-axis and motor function and USB upgrade. 2 Operating instructions: Wired connection: On any interface of the host insert the slide rails of the left and right handles into the left and right slide grooves of the host to realize the wired connection with the host. Bluetooth connection: (1). Turn on the Switch host click the settings menu button on the main page interface click the System settings option to enter the next-level option menu. (2). Click the Airplane Mode option and then click Controller Connection (bluetooth) to turn on the Bluetooth function. (3). Press and hold the PAIR button for 3 seconds to turn on the pairing LED1-4 flashing water lights open the host homepage interface and click the Controllers menu and then click Change Grip/Orde. The host will automatically search for the paired handles and the handles will be searched after a few seconds. The automatic pairing with the host is successful and the corresponding channel light of the host is always on; after connecting click the A button and then select Close to exit to the main interface and you can start the game operation. After 60 seconds the handle is turned off without successful pairing. (The host has 4 channels in total). 3 Rounds: (1). After the handle has been paired with the same host once and the Bluetooth of the host is turned on short press any key to wake up the handle and enter the reconnect mode (except for L3 R3 PAIR) and LED1-4 flashes as a running water light. After a few seconds the handle and the host are automatically paired successfully and the host can start the game operation after the corresponding channel light is always on. (2). When the controller is in wired mode pull out the controller the controller will automatically connect back to the host the host will send the corresponding channel to the controller allowing the player to operate the game. 4 button composition: (1). Left handle: UP DOWN LEFT RIGHT L1 L2 L3 - SL SR PAIR screenshots and 1 analog 3D joystick. (2) Right handle: A B X Y R1 R2 R3 + HOME SL SR PAIR and 1 analog 3D joystick. To 5 charge: (1). When the handle is off when the type-c port of the handle is inserted into the adapter LED1-4 flashes slowly at 2Hz. After fully charged LED1-4 is always on and the LED goes out after removing the adapter. (2). When the handle is online or offline when the handle type-c interface is inserted into the adapter the host interface will be displayed in the charging state. (When the handle is in the handheld mode the type-c interface of the handle cannot be chargedAvoid damaging the host) (3). The left and right handles can be inserted into the slide rail grooves on both sides of the SWITCH host and the handle can be charged while charging the host through the charging adapter of the host. (When there is no AC adapter to charge when the power of the host is above 50% the host will charge the handle with low power)n