Features: 1.Processor Support: H61 PC motherboard, supports LGA1155 processors, supports for Intel Core i7/i5/i3, for Celeron for LGA1155 series processors. 2.Dual Channel DDR3: Computer motherboards use dual channel DDR3, greatly improving the performance of the motherboard, the maximum memory capacity of 16GB. 3.Support HD Video Output: VGA and HD Multimedia Interface, support digital HD video output, bring high definition visual experience. 4.Multi Phase Power Supply: Stable and precise power supply, evenly distributed, a variety of power chipset thermal load to improve the performance of the CPU. Multi phase power supply, more stable and durable 5.PCB Board: Desktop motherboard using PCB board, long time use without deformation, so as to ensure long term stability. specification:Item Type: DDR3 Mainboard Material: PCB Chipset: H61 Motherboard Architecture: M ATX Motherboard Size: Approx. 190 x 170mm / 7.5 x 6.7in CPU Slot Type: for LGA 1155 (Support for Intel core i7 i5 i3) Network Card: 100M Network Card Graphics Card Slot: PCIE 16Xx1 Support Memory Type: DDR3x2 SATA Interface: SATA2.0x3, M.2x1 USB Interface: USB3.0x2, USB2.0x4, Front USB3.0 Pins x1, Front USB2.0 Pins x1 Sound Card: 5.1 Channel Maximum Memory Capacity: 16GB Power Connector: 24pin x 1, 4pin x 1 Expansion Interface: VGA, HD Multimedia Interface, PCIE 1X Expansion Slot x 1 Battery Type: CR2032L Button Cell (Ship with Inbuilt Battery) Battery Capacity: 240mAh Fix the motherboard in the main case, and then connect the connectors according to the corresponding mark. No power on problem: When the device won't power on and the power indicator doesn't light up, make sure the power supply is connected and working properly. If your CPU fan is installed correctly, you can also determine whether the power supply is working properly by judging whether the fan can work properly. 1. Confirm the power supply of the power adapter a. Please check the connection of the power cord and whether the socket is plugged in as shown in the figure below. If there is a main power switch on the extension cord, please make sure it is on state. b. Replacing the extension cord and socket will help solve the problem. Verify that the motherboard power supply is properly connected: 1. Make sure the poweradapter's power cord is properly plugged into the ATX power connector. The motherboard may contain 24pin EATXPWR and 8pin EATX12V, make sure that both 8pin EATX12V and 24pin EATXPWR are connected to the power adapter. The location and number of powerconnectors may vary by model, some motherboards may contain 24pin EATXPWR and 4pin EATX12V, both connectors should be linked to the power adapter Does not power on: When the fan and Q LED indicator/Q CODE do not respond when the power button is pressed to start the computer, please follow the instructions below to troubleshoot the problem 1. Follow the troubleshooting steps above to confirm that the power adapter is properly plugged into the ATX power connector for the motherboard's power supply 2. Keep the CPU, CPU cooler fan and a separate RAM display on the motherboard. Remove all USB devices and external cards from the motherboard, including mice, keyboards, card readers, flash drives, external hard drives and external PCIE cards, etc. Remove all cables from the motherboard, including network cables, audio cables and display cables (HD Multimedia Interface/VGA/DVI/DP). Then try to turn on the computer, if it turns on properly maybe the problem comes from the external devices removed. Reconnect the external devices one by one until you determine which external device or cable is causing the problem 3. Try to clear the CMOS PackageList:1 x DDR3 Mainboard (Ship with InbuiltBattery) 1 x Bezel 1 xSATACable