Features: Support POC (Power Over Cable) function, that is, as long as the 24V/1A power supply is connected to one end of the TX or RX device, the other end device does not need external power supply, and the POC power consumption consumes less than 10W. Supports long-distance transmission using a UTP cable.(Cat5e/6) UTP network cable terminals follow the direct interconnection method standard and support bidirectional RS-232 control signal transmission. Transmission distance: Category 6 network cable (cat6), 70 meters: 1080P 60Hz/36bit, 3D 1080P 30Hz/36bit, 40 meters: 1080P 60Hz/48bit, 1080P 120Hz/24bit, 3D 1080P 60Hz/36bit, 4K x 2K 30Hz/24bit. Full HD support: 1080p/60Hz/48 bit/pixels, 1080p/120Hz/24 bit/pixels, 3D 1080P60Hz and 4K x 2K/30Hz/24bit. Supports two-way broadband infrared control signal transmission, display resolution up to 4K x 2K/30Hz. Specification: Material: Metal Size: Approx 11.5x6.5x1.7cm/4.53x2.56x0.67inch Frequency Bandwidth: 297MHz (10.2Gbps) Transmitter Input/Output Port: 1x HDMI female port/1xCAT6, 1xIR Tx/1xIR Rx/1xFor Phoenix terminal Receiver I/O Port: 1xHDMI female port/1xCAT6, 1xIR Tx/1xIR Rx/1xFor Phoenix terminal Power Consumption: DC 24V 1A Electrostatic Protection: ±8kV (air discharge), ±4kV (contact discharge) Operating Temperature: 0℃-40℃/32℉-104℉ Storage Temperature: -20℃-60℃/-4℉-140℉ Relative Humidity: 20-90% RH (no condensation) Power Supply: 20W Package List: 1 x HDMI Extender Transmitter 1 x HDMI Extender Receiver 2 x Wideband IR Transmitter Cable 2 x Wideband IR Receiver Cable 1 x 24V/1A Power Adapter 2 x For Phoenix Terminal 1 x Instructions