①. Item Type: Incubator Temperature and Humidity Sensor Set ②. Material: Plastic ③. Size: Approx. 160 x 80 x 95 mm / 6.3 x 3.1 x 3.7 inches ④. Sensor: A temperature sensor (2 meters long), A humidity sensor (2 meters long), approx. 2 m / 6.6 ft ⑤. Setting range: Humidity 10 - 80% RH, Temperature 1 - 65 ℃ ⑥. Display range: Humidity 0 - 99% RH, Temperature -9.9 - 99.9 ℃ ⑦. Measurement accuracy: Humidity 3% at 25 ℃, Temperature 1% at 25 ℃ ⑧. Control output: Seven - way (main heating, auxiliary heating, lighting, humidity control, right egg, left egg, fan) control, right egg, left egg ⑨. Output load: main heating ≤ 1500 W, auxiliary heating ≤ 1500 W, lighting ≤ 100 W, humidity control, right egg, left egg, fan ≤ 1 A/250 VAC ⑩. Incubation days: The maximum number of days that can be recorded is 99 days ⑪. Egg turning controller: Adjustable egg turning cycle 1 - 999 minutes ⑫. Egg turning time: 0 - 999 seconds adjustable ⑬. Egg turning number: 0 - 999 times adjustable ⑭. Ventilation control: Adjustable ventilation cycle 1 - 999 minutes ⑮. Ventilation time: 0 - 999 seconds Adjustable ⑯. Lighting control: Adjustable lighting cycle 1 - 999 minutes ⑰. Lighting time: 0 - 999 minutes adjustable ⑱. Working environment: -10 - 45℃, less than 90% relative humidity without condensation ⑲. Weight: Approx. 529g/19oz ⑳. Package list: - 1x humidity sensor - 1x temperature sensor - 1 x controller host - 1 x user manual ㉑. Package contents: This incubator controller kit includes 1 humidity sensor, 1 temperature sensor and 1 controller host. ㉒. Temperature and humidity control: The incubator controller temperature and humidity sensor kit has temperature control, humidity control, and factory reset functions. ㉓. Multi - function: The incubator controller temperature and humidity sensor kit has LED light indication, ejection timer control, alarm control, temperature and humidity calibration, incubation days setting, and function control parameters. ㉔. Easy to operate: The incubator controller temperature and humidity sensor kit also has a lighting function, egg turning control, and switch operation, which is easy to operate and convenient to use. ㉕. Wide voltage: The incubator controller temperature and humidity sensor kit uses a wide voltage of 100 - 240V and can be connected to any incubation equipment.