Incubator Controller Mini Double Current 5 Incubation Modes Incubator Temperature Control Instrument 180‑240V Item Type: Incubator temperature control instrument Material: Plastic Size: Approx.20.5 x 16.5 x 8.3cm / 8.07 x 6.5 x 3.27in Weight: 872 g / 30.8 oz(approx.) Working Voltage: 180-240V Output Current: Heating AC220V/8A,fan AC220V/5A,turning egg AC220V/5A,humidifying AC12V/0.2A,cooling DC12V/0.4A,lighting DC5V/0.1A. 1. Temperature Display Range: 0-40.5℃ 2. Temperature Measurement Accuracy: ±0.1℃ 3. Humidity Display Range：0~99%RH 4. Control Accuracy: ±3%RH 5. Output Path: 6 paths (heating, cooling (ventilation), turning eggs, humidification, fan, lighting) 6. Measuring Line Length: Approx. 2m / 6.6ft 7. The Number Of Egg Turning: The maximum can record 999 times 8. Egg Turning Cycle: 0~999 minutes (factory set at 90 minutes) 9. Egg Turning Time: 0~999 seconds (factory set at 19 seconds) 10. Air Change Cycle: 0~999 minutes (factory set at 120 minutes) 11. Air Change Time: 0~999 seconds (factory set at 15 seconds) 12. Relative Humidity: Less than 85% 13. Ambient Temperature: -20℃~70℃ How e Temperature and humidity setting: When the controller is in custom mode (when the custom indicator light is on), the user can set the temperature and humidity by himself. If the incubation requires a temperature of 37.8 degrees and humidity of 60. should press the set key that lift the hand, the set humidity window SV shows PP, the set temperature window SV flashes to show the current temperature setting value, adjust to 37.8 degrees by pressing the increase or decrease key. Press the setting key again i.e. lift the hand, the setting humidity window SV shows HH, the setting temperature window SV flashes to show the current setting humidity value, at this time adjust to 60% by pressing the increase or decrease key. After the setting is completed, you can tap the setting key to exit or more than 10 seconds without operating on the key, the system automatically exits the setting state, and the previously modified