The M10 GPS uses a multiconstellation GNSS powered by M10, a parallel GNSS receiver that can receive and track multiple GNSS systems.All four major GNSS constellations (GPS, , GLONASS and BeiDou) can be received simultaneously thanks to the multiband RF frontend architecture.It also comes with an IST8310 compass, a tricolor LED indicator, a buzzer and a safety switch. There are 3 different connectors to choose from for different uses. The module has a baud rate of 115200 (previously 38400).The high gain 25 x 25 mm2 patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases the flexibility of device installation. It has an active circuit for the ceramic patch antenna, a rechargeable backup battery for hot start.Requires PX4 1.14, 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer, the status indicator driver has changed. This LED supports PX4 1.14, 4.4.0 and newer.GNSS Receiver:Ublox M10Number of Concurrent GNSS:Up to 4 GNSS,BeiDou,,GLONASS,GPS,QZSSFrequency Band:GPS L1, E1,GLONASS L1,BeiDou B1,SBAS L1,QZSS L1Compass:IST8310Output Protocol:UBX(),NMEAAccuracy:2.0m Nav. Update Rate:Up to 25 Hz (single GNSS) ,Up to 10 Hz (4 concerrent GNSS)GNSS Augmentation System:EGNOS, GAGAN, MSAS and WAAS,QZSS: L1SDefault Baud Rate:115200Input Voltage:4.75.2VPort Type:JST10PAntenna:25 x25 x4 mm ceramic patch antennaPower consumption:Less than 200mA @ 5VOperating Temperature:4080Cable Length:26cm (42cm cable purchase separately)Other:Tricolor LEDOnboard BuzzerSafety SwitchLNA MAX2659ELTRF AmpliferRechargeable capacitanceLow noise 3.3V regulatorDue to different batches, the printed words on the product will be different, which does not affect use.Colour:BlackMaterial:ABSPackage Contents:1 * GPS Module1 * Carbon Fiber Stick2 * Bases1 Set * Mounting ScrewsOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/ 13cm.