Features Magnetic induction: adopts the magnetic induction design, with accurate counting, fast response and strong practicality. Wide Range: With large counting range and convenient zeroing operation, which is very suitable for die cutting machines. Safe Operation The electronic counter has no mechanical wear, the operation is safe and installation easy. Excellent accessories: with probe and magnetic block, excellent performance in cooperation, easy to install and use. LCD Display The electronic counter is a 5 digit large LCD display with extremely low power consumption and clear display. Specification: Item Type:Electronic Counter Model: HX-5A. Clearing method: panel external Counting range: 0-99999. Power supply: 1.5V 600mAh AA ordinary battery x 1 (built-in battery) Minimum pulse width to erase: 0.1 seconds Maximum counting frequency: 20 Hz. Use ambient temperature: -5-40°C. Minimum counting pulse width: 10ms Maximum contact resistance: ≤10 kΩ. Minimum contact separation resistance: ≥500KΩ. Package list: 1 x counter. 1 x probe. 1 x probe mounting sheet. 1 x magnetic block. Small note: The count and reset signal lines should be as short as possible. Do not place strong wires or power lines on the signal lines to avoid unnecessary interference; use shielded cables to connect to the reset terminals if necessary. Package List 1 x Counter 1 x Probe 1 x Probe Fixing Sheet 1 x Magnet Block