Features: Wide supply voltage range: The built-in intelligent sensing chip of the proximity switch can sensitively detect objects. When the proximity switch is close to single target objects, it will send a control signal. High frequency: The proximity switch is widely used in the automatic control industry for detecting, controlling, and non-contact switching. Sturdy, small volume, convenient installation. The proximity switch has TVS tube protection and strong anti-interference ability. It can directly connect to transistors, TTL, and other logic circuits. This Hall NPN sensor consists of a voltage regulator, voltage generator, difference amplifier, Schmitt trigger, and open collector output. The input is magnetic induction, and the output is a digital voltage signal.Appearance: M12mm cylinder Output: NPN three-wire normally open type Detection distance: 10 mm Supply voltage: 5-24VDC, 6-36VDC Output current: 200mA Objects that can be detected: Permanent magnets Switching frequency: 320 kHz Shell material: Copper Package List: 1 x Inductive Proximity SwitchNote: 1. Please allow 1-3 mm error due to manual measurement and slight weight variation. 2. Due to lighting effects and monitor differences, the actual color may vary slightly from the image.