1Using cross-roller guide rails, possess high accuracy and stable movement. Can be fixed to the applicable position with customers' accurate machinery or instruments 2Light weight, the main material is aluminum alloy, suitable for other built-in equipment 3The micrometer drive mode is ultra-accuracy, the rotating platform can accurately adjust the angle of the platform to the approximate position, and the thickness adjustment switch screw can fine-tune with the micrometer 4The sliding table can be applied to various production machinery with high accuracy or medium load, inspection device, accurate positioning and quantitative movement 5There are various types of sliding tables that can be matched with each other, such as single axes, dual axes, z axes, c axes, r axes, etc. 6Diversified feed methods such as coarse and fine movement handle/centimeter probe, feed screw, rack and pinion, with scale to manage the movement value Item Type: Manual Displacement Platform Material: Aluminum alloy Table Diameter: Approx. 60mm / 2.4in Movement Mode: RS rotation R axes Stroke: 360 Degree coarse adjustment Fine Adjustment: 5 Load: 29.4N (3kgf) Minimum Scale: 2 Degrees Concentricity: 0.03mm Table Type: Manual sliding table Installation Method:1. Use the countersunk holes on the base to install the platform.2. Rotate the work surface to make the screw through holes and the countersunk head on the base concentric.3.Then you can fix it with screws and repeat the left side, then the platform can use 4 countersunk holes fixed. 1 x Manual Displacement Platform Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.