(Blue)- Current Module MAX471 Current Detection Module 3A Range Current Measurement Module DC 3-36V Voltage Current Sensor Module Compatible with Arduino Features: 1.High-End Sensing: Experience impeccable current detection with the MAX471 current module, featuring advanced capabilities to accurately monitor electrical currents for your critical applications. 2.Precision Resistance: Profit from the current sensor module's integrated precision shunt resistor, ensuring precise current measurement for the most demanding projects. 3.Scalable Range: Easily extend your current detection beyond the 3A limit by paralleling units, making the MAX471 professional module highly adaptable for larger-scale electrical monitoring. 4.Reliable Accuracy: Trust in the MAX471 current detection module's consistent performance, thanks to its components that provide dependable readings and long-term stability in a variety of use cases. 5.Versatile Applications: With the ability to handle up to 3A as a standalone and more when paralleled, this current measurement module is ideal for a wide range of DIY electronics and industrial tasks. Specification: Origin: Mainland China Product description: Functional description This current detection module uses the precision high-end current detection amplifier chip MAX471 produced by Midea Corporation of the United States. This module does not require an external power supply, and is directly powered by the power supply inside the module under test. It is generally used to detect current in a DC circuit with a power supply of 3-36V. The internal detection resistor has a detection capacity of 3A. Using it in parallel can also expand the ability to detect current and output a voltage proportional to the current. At the same time, the wiring is convenient and simple to use. This module should be connected before the load to detect the current and after the load power supply. Input wiring: 1. INPUTand is directly connected to the positive pole of the power supply (the positive pole of the load power supply), and INPUT- is directly connected to the positive pole of the load (change the load power supply). 2. GND is connected to the negative pole of the power supply or load. Output wiring: 1. OUT outputs a voltage value, so it can be connected to the AD input terminal of a microcontroller. The ratio of the output voltage value to the detected current value is 1V/A. (That is, the output voltage value is 1V, which means that the detected current is 1A) 2. GND is connected to the negative pole of the microcontroller. Voltage range: 3-36V Detection current range: 0-3A Current-to-voltage conversion ratio: 1V/A Accuracy within normal operating temperature range: 2% Accuracy maximum power supply current: 100uA Product size: 25.00x17.00x12.00mm/0.98x0.67x0.47inch Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Product Included Blue 1 x Current Module [relateproductdetail/] Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.