High quilty: The mist nozzles are made of brass, strong, durable and anti-rust. The fixed parts are made of recyclable plastic and rubber for easy connection and no leakage.Easy to use: You only need to connect the 3/4 inch adapter to the garden hose valve to transport you fine mist in hot weather, which significantly cools the air.Widely use: Can be used in misting misters cooling system, greenhouse, irrigation kit, umbrella, pavilions, etc.Steps for usage1. It is recommended to install the atomization system at a height of 2.5m-3 meters.2. Connect the adapter to the faucet.3. Turn on the faucet to clean the system for 1 minute to clean the system and remove impurities.4. Screw the spray nozzles to the tee fittings, except for the last nozzle.5. Turn on the faucet to clean the system for 2 minutes to ensure that the system is completely cleaned.6. Turn off the water and install the last nozzle on the connector and use the end plug.7. Fix the atomization pipe with the provided cable tie saddle clamp.8. Turn on the faucet until the sprayer works and enjoy the cooling atomization system.9. When the atomization system is not used for a long time, close the nozzle to keep it dry and cleanLength of PE Pipe:59.05feet /18 metersColour:blackMaterial:Copper+plastic+rubberPackage Contents:1 * 18 Meters PE Pipe 26 * nozzles 26 * Three-way spray nozzles60 * cable ties60 * tube buckles 1 * plug 1 * connectorOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.