MN300 Auto sensor simulator:1. analog voltage type sensor:Accelerator pedal sensor, throttle position sensor, oxygen sensor oil rail pressure sensor, boost pressure sensor, engine oil pressure sensor, intake pressure sensor, air conditioning pressure sensor, etc2. analog resistance type sensor:Coolant temperature sensor, intake temperature sensor, oil temperature sensor,exhaust temperature sensor, fuel temperature sensor, evaporator temperature sensor, ambient temperature sensor, etc.3.oxygen sensor signal 0.1-0.9V automatic jump.4. The ratio of two signals of the accelerator pedal sensor is 2:1.5. the sum of the two signals of the throttle position sensor is equal to 5v.6. Built-in precision multi-coil wire-wound potentiometer.7. multiple sensor signal output at the same time, each signal is adjustedseparately, do not interfere with each other.Product parameters.1.power supply: DC 12-24V.2. voltage signal: 0-5V3.resistance signal: 0-10KQ4.oxygen sensor signal: 0.1-0.9v5. the sum of the dual signals of the throttle position sensor is equal to 5V.6.the acceleration pedal sensor dual signal ratio 2:1.Colour:blackMaterial:plasticWarm reminder:1. the instrument needs an external power supply, the power supply needs to be prepared by the user, you can use the car battery or use 12-24V DC regulated power supply.2. this instrument is a special equipment for auto repair, non-professional personnel please use under the guidance of auto repair technicians Please check as much as possible to make sure the item is what you need.Due to different batches, there may be differences in product appearance and printed text, which will not affect usePackage Contents:1 * MN300 Auto Sensor Simulator