Feature: 1. Can display the current measured torsion value and speed value in real time 2. The current power value can be calculated directly, allowing the sensor to be overloaded by 200% 3. Support RS485 communication and active upload protocol, the communication rate can reach 500 times per second 4. This sensor supports simultaneous output of transmission current and transmission voltage 5. The sensor comes with OLED display, the resolution is 128 x 64 6. Can perform simple calibration, clearing, filtering and other operations 7. The accuracy achieves more than 1/1000 accuracy, excellent 0 point stability 8. Non-contact, no maintenance, no wearing parts and no life limit Specification: Item Type: Sensor Rated Capacity: ?? 0.1N.m Power Input: DC24V Current Consumption: Below 150mA Torsion Output: ?? 5VDC; 0-10V; 4-20mA Speed Output: 60 pulses / rev Response Performance: 1kHz Load Resistance: 2k?? or more Signal Delay: 0.6ms (50% response) Allow Overload: 200% FS Operating Temperature Range: -10 ~ + 50?? Non-Linearity: 0.1% FS Repeatability: 0.03% FS Lag: 0.03% Temperature Effect of 0 Point: 0.01% FS / C Temperature Effect of Output: 0.01% FS / C Rated Speed: 10000rpm The Fastest Rotation Speed: 15000rpm Maximum Twisted Angle: 2.60x10rad (0.149??) Moment of Inertia: 0.38kgcm Vibration Natural Frequency (rotor Part): 19.4kHz Torsion Constant: 3.85x10Nm / rad. Package List: 1 x Sensor 1 x Line