NA4 Weighing Sensor Load Cells Electronic Scale Sensor 100KG The elastic body of the sensor is made of aluminum alloy material; Surface anodizing treatment White glue seal, four corner correction, easy calibration High precision, with multiple accuracy levels available from C3 to C5 Application fields: Widely used in electronic pricing scales, weighing scales, counting scales and other large platform electronic scales, packaging machinery equipment, etc. Rated output:2.0 mV/V±5% Zero Balance:±0.0200 mV/V Non-linear:0.02 %R.O. Hysteresis:0.02 %R.O. Repeatability:0.02 %R.O. Creep (30 minutes):0.02 %R.O. Back to Zero (30 minutes):0.02 %R.O. Overload rate:150 %R.O. Overload rate:200 %R.O. Output temperature effect:0.002 %R.O./℃ Zero temperature effect:0.003 %R.O./℃ Input impedance:410±15 Ω Output impedance:350±5 Ω Insulation impedance:greater than equal 5000 MΩ/(50VDC) Recommend operating voltage:5-12 VDC Operating voltage:15 VDC Operating temperature range:-20-60 ℃ Cable:Φ5 x 2m Recommend table size:500x600 mm;600x600 mm Wiring mode:Red: Power +, Black: Power-, Green: Signal +, White: Signal- Rated load:200KG/100KG Color:As Shown Material:Aluminum alloy Package Contents: 1 * Load Cells Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.