This box corresponds to control types EDC15 (crude oil) and ME7 (). The EDC15 control for crude oil engines is installed in the models of for or and for from 1999 onwards. The ME7 control for engines up from 1.6 I is also installed Also backed up are control unit types ME7.5, ME7.5.1, ME7.1, ME7.1.1 Use guide: Simply plug Box EDC15 or ME7 into the vehicle's diagnostic socket (OBD2) Then put the OBD2 and switch to " OFF " on Drive box. After only 20 to the immobilizer DEACTIVATED (IMMO OFF) NO NEED TO COMPUTER The led on the tool will to flash slowly, after some seconds the led flashes fast, mean the immo function is disabled The car will work without Trasponder key switch to " ON " on Drive box. After only 20 to the immobilizer ACTIVATED (IMMO ON) Adapted for following models, with in motronic trypes EDC15(crude oil) or ME7 () Basically applies: not for 1,8T and 2,0TFSI models and 1.4 and 1.6 engines. The Tool on this page are sold exclusively to autohoritis and tradespersons with legatimation for the automobile industry Material:plastic colour:black Package Contents: 1 x OBD2 Drive Box Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.