Vgate car scanner for your needs! Designed for car enthusiasts who want to perform professional-level diagnostics. Fully compatible with all OBD2 protocols and commands, featuring an auto-sleep / auto-wake function that minimizes power consumption and helps protect your vehicle's battery life. Note: The auto-wake function is not supported on hybrid or electric vehicles. Read both generic and manufacturer-specific diagnostic trouble codes. Equipped with a fast ARM processor capable of processing up to 30 PIDs per second. View real-time ECU sensor data including engine RPM, fuel system status, fuel pressure, oxygen sensor voltages, and other key vehicle parameters. Prepare for emissions testing by checking readiness status. Read and clear trouble codes, turn off the MIL (Check Engine Light), view freeze frame data, and monitor I/M readiness status. When paired with a compatible OBD2 app, the Vgate iCar Pro BLE4.0 unlocks enhanced diagnostic capabilities. After 30 minutes of engine shutdown, the device automatically enters sleep mode to prevent battery drain. Smart activation triggers wake the device when connecting via Bluetooth, unlocking vehicle doors, or starting the engine. Compatible with all OBD2/EOBD compliant vehicles. Supports all OBD2 communication protocols including SAE J1850-PWM, SAE J1850-VPW, ISO 9141-2, ISO 14230-4 (slow and fast), ISO 15765-4 (CAN), SAE J1939 (CAN), and ISO 11898 (raw CAN). Suitable for gasoline vehicles from 2001 (Europe) and diesel vehicles from 2003/2004 (Europe), as well as OBD2-compliant vehicles from 1996 onwards (USA) and 1998 onwards (Canada). Designed for use with 12V gasoline vehicles and light-duty 12V diesel vehicles weighing 6.5T or less that support OBD2 standards. Not compatible with heavy-duty 24V diesel vehicles such as semi-trailers or tractors, which use different communication systems. Works with popular OBD2 apps on iOS and Android platforms, including Bimmercode, OBD Fusion, OBD Auto Doctor, OBD Car Doctor, JScan, Torque Pro, and Torque Lite. Connection requires a third-party application on your smartphone or tablet. For Android devices, connect using the name "Android-Vlink". For iOS devices, enable Bluetooth and configure the connection through the OBD app settings. Usage steps: Plug the Vgate iCar Pro Bluetooth 4.0 OBD2 adapter into the vehicle’s OBD2 port. Ensure Bluetooth is enabled on your mobile device and pair it with the adapter. Launch your preferred OBD2 app to begin diagnostics. Functionality may vary depending on the selected app. Professional OBD diagnosis tool supporting low energy consumption and broad vehicle compatibility. Compatible with iOS and Android devices. Includes support for iCar series, vLinker series, and battery terminal series.