Feature: 1. Using standard BNC connectors, it is usually suitable for many types of oscilloscopes on the market. 2. Differential signals, that is, non‑commonly grounded multi‑channels, can be directly measured without worrying about damaging device under test and measurement system. 3. The high resistance isolation between the oscilloscope and the device under test reduces the risk of electric shock. 4. Frequency used on the oscilloscope is as high as 50MHZ, suitable for power testing, research and development, maintenance, etc. 5. The attenuation rate is X100, X1000, designed for the measurement of active high‑voltage differential signals. Specification: Item Type: Active High Voltage Differential Probe Material: ABS Bandwidth: DC 50MHZ Attenuation: X100, X1000 Accuracy: ±1% Input Voltage Range: (DC+AC PEAK TO PEAK) ≤700V for X100 (About 240V RMS) ≤7000V for X1000 (About 2400V RMS) The Highest Allowable Input Voltage: The highest differential voltage: 7000V (DC+AC PEAK TO PEAK) The Highest Voltage between Input Terminal and Ground Terminal: 5KV RMS Input Resistance: Differential: 20MΩ/1PF Input Impedance From Single End to Ground: 10MΩ/2pF Output Voltage: ≤7V Output Impedance: 50Ω Rise Time: 7ns for X1000, 7ns for X100 Noise Suppression Rate: 60HZ: >80dB; 100HZ: >60dB; 1MHZ>50dB Designated External Power Supply: 6V DC Power Supply Power Consumption: Maximum Power Consumption: 150mA (0.9W) Input Voltage: AC 100-240V Working Temperature and Humidity: 0℃-50℃, 10%-85%RH Storage Temperature: -30℃-70℃, 10%-90%RH How to Use: 1. Connect the oscilloscope to the output 2. Power on the high voltage differential probe connecting plug 3. Adjust the vertical switch of the oscilloscope first (adjust the attenuation rate and vertical switch on the oscilloscope to the same position) 4. Measurement. Package List: 1 x Active High Voltage Differential Probe1 x Power Cord1 x Manual