1、Probe Parameters: The high voltage differential probe has low background noise, excellent amplitude frequency, and good common mode suppression ability, allowing users to easily test high frequency and high voltage signal, with a bandwidth of 150MHz and a maximum voltage of 1500Vpk. 2、Multiple Functions: When measuring the FET switching frequency in most switching power supplies, the MDP probe can effectively eliminate high frequency noise, support fast zeroing and dual range selection, the standard BNC interface can be used with any oscilloscope. 3、USB Power Supply: The high voltage differential probe is directly powered by the USB port of the oscilloscope through a Type C cable, which is compact and practical, with overvoltage alarm LED flashing and buzzer beeping, indicating an over range alarm. 4、Good Performance: Featuring high accuracy, high input impedance, low input capacitance, and minimal load effect, it greatly improves the accuracy of differential signal, the high common mode rejection ratio can meet the high frequency of common‑mode voltage floating measurement. 5、Applicable Scenes: Suitable for floating measuring, high voltage isolation measuring, switch power supply design, power converter design, inverter, UPS power supply, welding, electroplating, induction heating, CRT display design, low voltage electrical appliances and power drive experiments. Item Type: High Voltage Differential Probe Model: MDP1501 Bandwidth: 150MHz Rise Time: ≤2.33ns Attenuation: 50X, 500X Accuracy: ±2% Background Noise: Full Bandwidth: 50X: ≤0.9mVrms, 500X: ≤0.4mVrms 5MHz Bandwidth Limit: 50X: ≤0.4mVrms, 500X: ≤0.35mVrms Common Mode Rejection Ratio: DC: >-80dB, 100kHz: >-60dB, 10MHz: >-30dB, 100MHz: >-26dB Delay Time: 11.99ns (50X), 12.27ns (500X) Input Impedance: 16MΩ 1.5pF (Differential), 8MΩ 3pF (Single End to Ground) Power: 2W Power Supply: Type C Connector Overload Indication: LED Alarm, Buzzer Product Size: Control Module: Approx. 91 x 33 x 15mm / 3.6 x 1.3 x 0.6in Signal Box: Approx. 100 x 36 x 20mm / 3.9 x 1.4 x 0.8in Input Cable Length: Approx. 8cm / 3.1in Output Cable Length: Approx. 120cm / 47.2in Temperature: Operating: 0℃-40℃, Non Operating: -30℃-70℃ Humidity: Operating: 5%-85%RH (0℃-40℃), Non Operating: 5%-85%RH (≤40℃), 5%-45%RH (40℃-70℃) 1 x Probe Host 2 x Crocodile Clips 1 x Type C Cable 1 x User Manual 2 x Extendable IC Clamps 1 x Plug