Compatible with Most OscilloscopesThe oscilloscope probe attenuation can be adjusted by 1X and 10X slide switches, with a bandwidth of 100MHz, suitable for oscilloscopes of most manufacturers and equipped with standard BNC connectors. The oscilloscope probe is compatible with BNC interface, digital oscilloscope, virtual oscilloscope, portable oscilloscope, etc. High Sensitivity Pure copper gold-plated pins, low resistance of contact, fully shielded soldered BNC connector, low signal interference. Reliable designModular structure, interchangeable probes. High input impedance (X10 range), low power consumption. The removable hook tip is protected by a plastic shell. The positioning sleeve ensures the stability and reliability of the exposed tip of the test point. Easy-to-use design The color identification ring is compatible with most probe sizes oscilloscope probe, making it easier to distinguish different channels. Complete KitThis product includes two oscilloscope probes, eight color marking rings, two protective caps, a regulator rod, a BNC to Minigrabber test lead. Attenuation ratio: 1X AND 10X Output type: 100 MHz Rise time: 3.5ns Input resistance : 1X: 1M2%; 10X: 10M2% Input capacitance: 1X: 70pF~120pF 10X: 13p~17pF Compensation range: 10 ~ 35 pF < p>Maximum input: 1X: 200 operating voltage (Vp-p); 10X: 600 operating voltage (Vp-p) Operating environment: 0~50, 0~80%RH Storage environment: -20~60 , 0~90% RH feature: The alligator clips are very strong. Disconnecting is not easy. When you hear the accessory hook &#34;da&#34;, it is installed. External insulation is compatible with all BNC oscilloscopes. Easy to use. Delivered quantity: 1 set