Item Type: Power Supply Adapter Board Model: LD-A250WL Material: PCB Power: 250W Input Voltage: 12V Output Voltage/maximum Load: +5VSB/2A, +5VDC/6A, +3.3VDC/6A, +12VDC/16A, -12VDC/0.05A Operating Frequency: IC built-in oscillator (250-350) kHz at Vcc-12V Feedback Reference Voltage: 0.8V2% at 12VDC Interface: 1 x ATX24Pin, 1 x CPU4+4Pin, 1 x SATA, 1 x IDE, 1 x DC5525 Cable Length: DC Cable Length: Approx. 320mm / 12.6in CPU Cable Length: Approx. 210mm / 8.3in IDE Cable Length: Approx. 200mm / 7.9in SATA Cable Length: Approx. 150mm / 5.9in Protection Function: (for +3.3V, +12V, +5.00V and +5.00VSB power output) Overcurrent Protection: When the output current reaches the peak current, the output is turned off Short Circuit Protection: When the output is short circuited, the output is closed Working Temperature/humidity: -5 ~ 55/45%~75% Storage Temperature/humidity: -40 ~ 70/10%~90% Applications: MINI computers, HTPC computers, POS machines, ITX cases, web servers, advertising machines, bank terminals, low-power systems, industrial control systems, etc.1The adapter plate has high performance, high heat resistance and more reliability. 2By directly inserting the motherboard ATX connector to eliminate 24 unnecessary wires, suitable for small ATX boards, saving space in the case. 3With over?current protection: when the output current reaches the peak current, the output is turned off. 4With short-circuit protection: when the output is short-circuited, the output is turned off. 5Output voltage/maximum load is +5VSB/2A, +5VDC/6A, +3.3VDC/6A, +12VDC/16A, -12VDC/0.05A.1 x Power Supply Adapter Board