1. Built-in high-frequency antenna, matching antenna depth, eliminating blind spots, reading the entire data card without interruption. 2. Increase the frequency of the key, the size of the card can accommodate everything. 3. Data analysis, completely stable, and low error rate. 4. The low frequency antenna improves the signal-to-noise ratio, the recognition speed is higher, and the mobile design can meet needs. 5. No antenna interface, no need to connect because it is easily damaged. Cancel lithium battery, easy and convenient. (In offline mode, you can use mobile power) (Low-frequency antenna is installed on the right) Antenna LF: 30.41 V @ 125.00 kHz Antenna LF: 22.01 V @ 134.00 kHz HF antenna: 28.43 V @ 13.56 MHz (Low-frequency antenna is installed on the left) Working voltage: 3.5-5.5V Current work: 50-130mA Length and width: 54mm x 86.6mm Thickness: 6.2 mm (thinnest) 9.8 mm (with screws) 15.8 (with low frequency antenna) Card operation mode: 1. Ordinary M1 S50 card reader and other Type B 14443A cards. 2. Analyze PRNG 0 using department-specific security. 3. Use embedded (mfoc) security to solve the entire map. Analog card mode: 1. the user ID of IC S50 / Ultralight / DESFire series cards. 2. Analog data M1 S50 for the entire sector. (Select card reader) 3. the shell M1 S50 and obtain the data used to calculate the key (select card reader) Silent mode: 1. A quiet data transmission analyzer between the M1 S50 card and the card reader, analyzing the key. 2. 14443A Class B silent card reader with full communication function. Type: Smart Card Reader Model Number: Proxmark3 color:Black Material:Plastic + Metal Package Contents: 1 x Proxmark3 Rfid Smart Card Reader 1 x USB cable(The color style is random, and the specified color style cannot be ) 1 x CUID card 3 x UID card 1 x UID interchangeable keychain Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.