Bicolour 5-point pyrograph for wood engraving. The kit contains: 1 universal tip, 1 shading tip, 1 signature tip, 1 micro tip, 1 solder tip, a holder is included. European type mains socket. Voltage: 220-240V - 50Hz / 60 Hz - 30W. The pyrograver measures 23 x 2.5 x 2 cm. Pyrography is the burning of wood in surface area, a thousand-year-old process and present all over the world. Use of the pyrograver: The tip is handled like a pencil, but you must have a light hand so as not to cut into the wood more deeply than you would like because the mark made is final ... Which gives a particular aspect to the wood. pyrography is the sepia color of the burnt part and the relief that can be obtained. Preparation of the work surface: Choose a suitable and resistant surface, all plastic surfaces such as waxed canvas are to be avoided. Before connecting it, screw the tip of your choice onto the pyrograver. Place it on its support in a stable manner. Plug in the device, it will heat up instantly. Wait until the pyrograver is cold again before changing the tip. Use: Unplug the pyrograver to screw on the tip of your choice (the tip is also called 'tip'). Position the pyrograver on its support. Wait a little while for the pyrograver to heat up. You can use your pyrography iron.