It is compatible with 6.0S and 6.1S (160A, with 160A letters on the shell) main boards. For 5.3, 6.0, and 6.1S (without 160A letters on the shell) main boards, it must be used with a voltage reduction plate. Connect the heating wire to the voltage reduction plate (default output is 6V). Connect the heating wire and blower motor in parallel to the voltage reduction plate OUT +-. Connect IN+- to the mainboard port for the smoke generator. Current for air blower is about 0.3A; the heating wire requires about 1.2A. Note: The smoke generator heating wire is 6V; blower voltage is 6V. It may be damaged if voltage exceeds 6V. A voltage reduction plate must be used if voltage exceeds 6V. Material: Composite material Color: Black Package Contents: 1 x Smoke Generator Only the above package content; other products are not included. Note: Lighting and different displays may cause slight color differences between the item in the picture and the actual item. Measurement error allowance is +/- 1-3cm.