Feature: 1. The relay controls the relay through the strength of light and controls the external circuit system. 2. 35mm rail installation is simple and quick, and can be installed in a convenient position at will. 3. With light detection sensor, you can also adjust the light sensitivity according to your needs. 4. The relay has IP20 protection level, as well as phase loss protection, short circuit and overload protection functions. 5. The relay can be used in equipment such as lighting, brightness detection, automotive supplies control and automation. Specification: Item Type: Light Control Relay Function: Light control switch Power Terminal: L-N Rated Power Supply Voltage: AC 110V-240V Rated Power Frequency: 50/60Hz Rated Impulse Withstand Voltage: 2.5kV Rated Insulation Voltage: 250V Power Consumption: Maximum 2VA Power Supply Allowable Fluctuation Range: -15%-+10% Sensitivity Adjustment Range: About 1-100Lx Working Mode: On-auto-off can be set Power Indicator: Green LED Sensor Detection Error: 35% Action Delay Time: 2min Output Contact Parameters: 1 x SPST 16A/AC 250VAC/24VDC Minimum Switching Power: 500mW Output Relay Indication: 500mW Mechanical Life: 1 x 10000000 Electrical Life (Resistive Load): 1 x 100000 Working Environment Temperature: -20~+55 Storage And Transportation Environment Temperature: -35-+75 Installation Method: 35mm rail installation Protection Level: IP20 Installation Location: All Installation Altitude: Approx. 2000 meters / 6561.7ft Pollution Degree: 2 Wiring Capacity: 1 x 2.5mm or 2 x 1.5mm 0.8Nm. Package List: 1 x Light Control Relay1 x User Manual