Original LCD Screen for Fitbit Sense 2 Digitizer Full Assembly About the product: 1. Replacement LCD screen and touch screen digitizer assembly for Fitbit Sense 2 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed to fit and function properly 5. Each unit is tested and inspected for quality before shipment 6. Professional installation is highly recommended. No responsibility will be taken after the screen has been installed Before Installation – Important Tips: Tip 1: Test before installation Do not remove any protective film or labels during testing. Be aware of static electricity. Always ground yourself using an ESD (electrostatic discharge) strap before beginning any repair to prevent damage to internal components. Wear eye protection and handle glass parts carefully to avoid injury from sharp edges. Tip 2: Test functionality prior to full installation This is a fragile component. Test the screen before final installation. Partially disassemble the device, connect the motherboard to the new LCD screen and o cable, power on the device, and verify full functionality. If the screen works correctly, proceed with installation. If the screen does not display properly, contact support immediately. Do not force installation if the screen fails testing. No responsibility will be assumed after installation. Tip 3: Avoid excessive cable bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure, including black screen issues.