Rotary Table 4/5/6inch Horizontal Vertical Rotary Table 4-Slot Rotary Table for Milling Machine MT-2 Rotary Table for Milling.      HV series horizontal and vertical dual-purpose indexing plate (vertical and horizontal rotary table) is one of the main accessories of the milling machine. It can be used for indexing drilling or milling, circumferential cutting, boring, and countersinking on the milling machine. The worktable has a 360° engraved line, and has a scale ring with a scale value of 1'and a vernier ring with a minimum differentiation value of 10". The rotary table has a braking and indexing worm off mechanism. When the HV series vertical and horizontal turntable is in the vertical position, it can be used in conjunction with the tailstock (special order) to perform circular indexing drilling and milling of more complex workpieces. 1. Technical description 1. Made of high-strength FC30 cast iron 2. Suitable for milling machine or other special machinery for split cutting 3. The new type of spindle locking system, compared with the traditional double-sided plate type, has stronger locking and more stable cutting 4. It can do 360 overturn, the handle is turned 4 degrees in a circle, and the minimum scale is 10 seconds. 5. Can be used in horizontal and vertical directions 6. Can be used as additional special accessories: honeycomb board and tailstock 7. Deceleration ratio 1:90 The model can be seen in the table data, and you can contact customer service if you need a large size.