1. USB 3.0 to SATA IDE converter allows you to connect 2.5Inch/3.5Inch Ide/SATA hard disks through USB port to the computer. This is a perfect tool to duplicate, copy, backup or transfer large amounts of data from one drive to another. It has a SATA II connector and two IDE connectors (40pin and 44pin)2. Support all 2.5/3.5 inch SATA/IDE HDD and 5.25 inch CD/DVD ROM CDRW,COMBO,DVDRW.DVDRAM adapter3. This SATA/IDE to usb adapter supports transfer rates of up to 5Gbps The actual transmission speed is limited by the setting of the device connected; Downwards compatible with USB 1.1/2.04. On/Off Switch for HDD protection.5. DC Power Supply 12V for 3.5Inch devices.LED activity indicator, Plug & Play, simple, reliable and stable.Huge Capacity Supportive Up to 6TB capacity of the drives supported. The LED indicator of the USB to SATA adapter can monitor the working status. Plug and play, Easy to use.WideCompatible: This IDE SATA adapter is universally compatible with for 10/8.1/8/ 7/Vista/XP, for OS 9/10, for Linux etc.Hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target; SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target equal IDE/SATA1 Source.Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.Voltage:AC 220VColour:BlackMaterial:PlasticPackage Contents:1 * SATA/IDE Connection1 * USB 3.0 Cable1 * IDE 4P Cable1 * 2.5 IDE Transfer Card1 * Power CableOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/ 13cm.