1Isolation 6in1 debugging tool, no need to jumper, DIP switch, etc., can implement isolation conversion between USB, RS232, RS485/422, TLL level 2YN4561I is compatible with USB 2.0 standard, supports for Windows, for OS X , for Linux , for Android operating system. Simply connect your device via USB interface, install the driver to use immediately 31kV isolation between USB, RS232, RS485/422, TLL, support mutual conversion between USB and RS232, USB and RS422/485, USB and TTL, TTL and RSS232, TTL and RS422/485, RS232 and RS422/485 4No external power supply, take electricity from USB port, support for WindowsXP / Server2003 / Vista / 7 / 8 / 8.1 / 10/ OS X , for Linux , for Android 5Standard USB b square port, equipment comes with a turn b wire, RS232 adopt the standard DB9 serial port male, RS485 / 422 is a plugin terminal Item Type: Serial Port ModuleMaterial: ABSModel: YN4561IUSB Compatibility: Compliance with USB 2.0 standards, support hot swap plug-and-playPort DesignUSB: Standard b square port, equipment comes with a turn b wireRS232: Standard DB9 serial port maleRS485 / 422: Plug-in terminalTTL: Insert terminalTransmission Rate: 1200bps - 115.2kbpsCheck Bit: Odd check, even check, no checkData Bit: 5, 6, 7, 8Stop Bit: 1, 1.5, 2RS232: TX, RX, GND, conforms to TIA / EIA-232RS485: D +, D- balance difference half duplex, in line with TIA / EIA-485 standardRS422: T +, T-, R +, R- balance differences full duplex, in accordance with TIA / EIA-42232 x RS-422 or RS-485 devices can be connectedTTL: VIO, RXIN, TXOUT, GND support 5V or 3V levelWork Distance: RS-232: 50ft(15 meters) at 9.6kbps 1 x Serial Port Module1 x Cable1 x User Manual Do not use outside the parameter voltage range.