1. It is quite suitable for replacing your old or damaged car gear shift knob. It has an appealing look, is wear - resistant and not prone to damage. 2. Installation is relatively easy without the need for drilling or cutting. 3. Installation instructions (for reference only): - Remove (unscrew) your original factory gear shift knob from the shift shaft. (For some cars, the knob might be stuck on the shift lever and difficult to remove. Please confirm before purchasing.) - Take out the screw adapter and install it on the shift shaft. Slip the gear shift knob directly onto the adapter and tighten it. (Please ensure the white plastic top cover on your shift lever is in good shape; otherwise, installation may be an issue.) - After installation, make sure the gear shift knob is firmly attached to the shift shaft and the shifter functions properly. 4. Style: With switch 5. Gear type: 6 - speed (R, 1, 2, 3, 4, 5, 6) 6. Dust cover: None 7. Item type: Gear shift knob 8. Applicable vehicle models: - Suitable for Scania 4 series (September 1995 - September 2004) - Suitable for Scania 3 series (January 1988 - December 1996) 9. Color: Black 10. Material: ABS 11. Package contents: 1 gear shift knob 12. Only the above - mentioned items are included in the package, and no other products are provided. 13. Precautions: Lighting during shooting and different monitors may lead to slight color differences between the item in the picture and the actual item. An allowable measurement error of +/- 1 - 3 cm exists.