brand new and high quality.Made of high quality material, durable and practical to use.Skimmer Door Weir Baffle Baffle Parts Replaceable Replacement Slag SkimmerHow to Remove and Install a Weir Gate Assembly This weir model has a snap-on tab design. The tabs flex inwards to enable them to fit and then snap into their designated slots within the skimmer unit. But first, here are steps youhave to follow to install the weir flap/gate properly: 1.You need to first turn off both the filter and pump. 2.If the old weir gate is still in place, you'll need to open the skimmer lid and access the old weir gate from there. 3.The locking pins are at the bottom of the weir gate. Feel around for the tabs and press both tabs inwards simultaneously. Once free, pull the old weir gate out from the skimmer lid. 4.You'll need to install the new weir gate from the front/poolside of the skimmer. First, insert the weir into the skimmer. to make the process easier, insert the weir gate sideways and insert pin first. Press the tab against its slot to depress it, making it easier to insert the other pin.5.Once both pins are in the right position, let go of the weir gate to release the depressed tab and enable both pins to snap in place.Colour:WhiteMaterial:plasticSize:about 21.5 x 13 x 2.1cmPackage Contents:1 x Skimmer Gate Weir BaffleOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.