[Model] 900M-TI Outer Diameter: Approx. 6.7mm / 0.26" Inner Diameter: Approx. 4.0mm / 0.16" Length: Approx. 43 cm / 16.93 " [ [Features] This tip has the advantage of long service life and does not rust easily, it is easy to install and use. [ [Applicable] This tip is applicable to 936, 937 soldering station and so on with its needle-like sharp end which is suitable for handicraft making, for example, it is attached to the alarm control as yes, the microswitch would have come off the small circuit board and the contacts of the microswitch are smaller than the microswitches. Product Description These iron tips are made of electroplated iron and nickel which protect them from oxidation, characterized heat resistant up to 480oC and a lifespan of more than 20,000 solder joints with proper use. As the The point is very sharp, it is suitable for craft finishing, for example, car problem, once micro the switch had jumped off the small circuit board, you found that the micro switch contacts are smaller than micro (smaller than a pinhead), or soldering in a narrow space also to revise the tin bridge coming out of the soldering to the chip. How about getting this set and making your soldering work more easily? Specification: Material: Copper Color: Silver Plating: Iron and Nickel (finishing) Outer Diameter: Approx. 6.7mm / 0.26" Inner Diameter: Approx. 4.0mm / 0.16" Length: Approx. 43cm / 16.93" Package Weight: Approx. 47g Model: 900M-TI Applicable to: 936, 937, etc. Temperature Range: 200-480 Quantity: 10pcs/bag To store used iron tips Use a sponge to clean the iron tip. Wrap them with tin solder. Turn off the power and wait for them to cool down. Place a pen on the iron shelf. Sold by Briday Store