Support all -wire or two-wire LED driver IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW,WS2813, LPD6803, LPD8806, APA102, APA105, TM1804, TM1814, TM1914, TM1913, P9813, INK1003, UCS1903, DMX512. You can R/G/B channel order.200 kinds of color change modes, auto mode and static color mode, which are and beautiful. Save setting automatically when power off. Brightness is adjustable.IOS and Android APP control via Bluetooth 4.0 or later version. Long control distance, convenient to use. Support IOS 8.0 and Android 4.4 or later version. Your smart Phone should support Bluetooth 4.0 or later version.DC5V-24V wide working voltage, preventing reverse connection of power supply, protecting LED light and controller well. Support setting controlled the pixels number.The maximum number is 2048 pixels.Can not work? check output voltage and amp of your power supply and confirm whether it can match controller and led lights. If the power supply, controller and led lights can be compatible with each other well, connect and set up again as the last product picture shows. set enough pixels number, RGB order and IC type. Otherwise they cannot work smoothly.Product weight: 40gRemote distance: About 20 metersModel: SP105E Bluetooth Color ControllerPrecautions: To control WS2812B , WS2811 and on the setting page.The controller only supports LED lights with smart IC. It cannot support ordinary RGB/RGBW without IC.Search "-LED"or scanning the QR code on the operating instructions to download and install the App. use a power supply not a battery to power the controller. The output power of power supply must be more than the max power of led light. For example, if the work voltage and max amp of your led light is 5V 10A 50W, power supply output must be 5V 10A 50W at least. rwise, it will work smoothly.If the color is wrong, for example, you the red, the color of the light strip is green, you need to a different , such as RGB, RBG, , GBR, BGR or .color: White Material: ABSSize: 85*45*22mm Package Contents: 1x SP105E Bluetooth LED controller1x 3pin female JST connector1x Mini screwdriver1x manualOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.