ed LINKSYS SPA232D VOIP PSTN Phone Adapter with FXS + FXO + 2x Ethernet Ports The product is shipped based on the color or size of the main image of the product page. 1) The SPA232D features the ability to connect standard telephones and fax machines to IP-based data networks with the additional benefit of an integrated connection for legacy telephone network "hop-on, hop-off" applications. SPA232D users will be able to leverage their broadband phone service more than ever by automatically routing local calls from mobile phones and land lines over to VoIP service providers and vice versa. If power is lost to the unit or Internet service is down, calls can be redirected to a traditional carrier via the FXO interface. 2) A user calling from a mobile phone or land line will be able to reduce and even eliminate international and long distance telephone charges by first calling their SPA232D via a local telephone number. The advanced authentication and call routing intelligence programmed into the SPA232D will route the call via the Internet to the far end destination. In addition, when using the SPA232D at the far end, VoIP calls placed to that location can be either answered or further processed and routed on as a local call to any legacy land line or mobile phone. 3) The SPA232D supports one RJ-11 POTS (Plain Old Telephone Service) FXS port to connect an existing analog phone or fax machine. The SPA232D also supports one PSTN FXO port to connect to a Telco or PBX circuit. The SPA232D includes 2 100BaseT RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to a broadband modem or router. The SPA232D FXS and FXO lines can be independently configured via software controlled by the service provider or the end user. 4) Installed by the end user and remotely provisioned, configured and maintained by the service provider, each SPA232D converts voice traffic into data packets for transmission over an IP network. in design, the SPA232D can be used in consumer and business VoIP service offerings including a full-featured IP Centrex environment. The SPA232D uses international standards for voice and data networking for reliable voice and fax operation **Telephony 1) Service ation via PIN, Digest, Caller ID ( core Type 1) 2) Per Call ation and Associated Routing 3) Least Cost Routing 4) Impedance Agnostics - 8 Settings 5) Call , Cancel Call , Call Caller ID Detection ( core Type 1) 6) Caller ID with /Number ( -national s) 7) Caller ID Blocking 8) Call to PSTN or VoIP Service: No answer, Busy, All 9) Do Not 10) Call Transfer 11) -way Conference Calling with Local Mixing 12) Message - Visual and Tone Based 13) Call Return 14) Call Back on Busy 15) Call Blocking with Toll Restriction 16) ed nnect 17) Distinctive - Calling and Called Number 18) Off-hook Warning Tone 19) Selective/ Call Rejection 20) Hot line and Warm Line Calling 21) Speed Dialing of 8 Numbers/Addresses 22) Music on Hold 23) Fax: G.711 Pass Through or Fax over IP via T.38 **Product Specific (SPA232D) 1) VoIP to PSTN (USA) Service Call Origination and Termination 2) PSTN (USA) to VoIP Service Call Origination and Termination 3) Single Stage and Two Stage Dialing 4) Calls to VoIP service - Selective, ated, All 5) Calls to PSTN service - Selective, ated, All 6) PSTN Line Sharing with ple Extensions 7) Automatic PSTN Fallback ( of or IP Service to - with Quiescence to l Operations) 8) d Inbound and Outbound Call Routing 9) Independent Configurable Dial Plans - 8 10) Force PSTN nnection 11) Sequential Dialing VoIP to PSTN (USA) Service Call Origination and Termination