Static Grass Applicator with Antislip Handle for DIY Scenic Modeling Projects

1. Charge the battery before use and ensure the wires inside the container make proper contact with the metal mesh, as this is a critical inspection step. 2. Add the grass powder. It is recommended to use grass powder with a length greater than 5mm for better results. Then securely tighten the lid. 3. On the target model and working surface, apply white latex evenly to prepare for sprinkling the grass powder. 4. Press the negative electrode connector firmly against the surface of the target platform, ensuring close contact. Then, use the grass planter to spray the grass powder from a distance of 2-3cm above the platform. 5. After applying the grass powder, remove any excess by pouring it out or using a model vacuum cleaner. Trim the fibers with small scissors and a toothpick to achieve an even, natural appearance. Material: Metal + Plastic Color: Black Package Contents: 1 x Flocking Machine (2 x 1.5V batteries not included) 1 x Small Diameter Grille 1 x Large Diameter Grille 1 x Bag of Grass Powder 1 x Brush 1 x Planting Template Tool Note: The package includes only the items listed above. Other products are not included. Note: Lighting and display differences may cause slight variations in color between the image and the actual item. Measurement may vary by +/- 1-3cm.