equipped with 1 static grass applicator, the plastic handle is about 9.65 inches/24.5 cm long, equipped with 4 cans of static grass in different colors, each can of static grass contains 60 grams, and also equipped with 1 brush, 50G Shrubs Bushes, 9 colors Shrubs Bushes, 14 each color, convenient to use and store the grass planter is made of ABS, the grass planter is sturdy and , with strong grass planting ability, and can plant static grass; In addition, the grass planting kit is light and convenient, suitable for 3-5 mm grass planting powder, and we also have other static grass combinations, you can choose to use according to your needs our flocking applicator has good electrostatic , designed for small flocking, DIY landscape mini terrain construction modeling, sand table building models and other DIY scenes the handle of the grass planting kit is of suitable size, comfortable to hold, easy to carry, The handle adopts anti-slip design, the internal circuit has low power consumption, high output voltage, and high grass planting efficiency; Before use, please prepare 2 AA batteries and put them into the grass spreader first, pour the static grass into one-third of the container, hang the high-voltage wire at the mouth of the bottle to connect it, then apply glue on the to be flocked, insert the ground wire close to the flocking (be careful not to touch the screen at this time), and finally and hold the elliptical switch to operate, and the grass fall vertically with static electricity; After use, release the switch Features: Mini Static Grass Flocking Mini flocking has good static and is good designed for flocking on small surfaces, DIY Scenic Mini Terrain Builds Modeling Sand Table Construction Model and other DIY scenes. Steps of Planting Grass: 1. Before use, insert the battery into the weed remover's battery compartment and check if the wires in the compartment are touching the mesh. 2. Twist the mesh cover, add grass powder smaller than 5 millimeters. Then screw the lid tightly. 3. Scoop out the white latex on the target model and table and spread evenly, preparing to sprinkle grass powder. 4. Connect the negative electricity to touch the target as close to the platform as possible, then sprinkle the grass seeds from 2-3 centimeters away from the target platform. 5. Once the grass powder is ready, pour in the grass powder or add powder and lightly tap with a vacuum model. 6. Dust the grass lawn on the desktop. Specifications: Material: ABS Color: multicolored 1 x Static grass applicator 4 x Static grass 1 x Brush 126 x Shrubs bushes 1 x Tweezer 1 X 50g Light green bushes Notes: Manual measurement, please allow slight errors on size. The color may exist a slight difference due to different screen displays. Package Contents: 1*set diorama supplies Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.