Description:Product parameterShell material: PC flame retardant materialPanel material: tempered glassInstallation hole distance: 86mmRated voltage: 90-250V, 50-60HzStart method: touchLoad power; 3-300W / opennote1. The capacitor must be tightly connected to the L and N of the L1 lamp, not behind the switch.Tips2. When the switch is in the energized state, do not put a cover on the glass panel. When the switch is in the energized state, place the glass panel top cover on it. Then the switch will not workPlease restart the main power switch at home. It will work3. Solve the problem of insensitive touchProblem: The switch base is screwed too deeply and too tightly, resulting in a gap between the backlight board and the panel.Solution: Don't screw the locking screw too deep, if you can't reach it, you can replace it with a longer screw; or fill something between the switch and the bottom box. For touch-sensitive situations, as long as you pay a little attention during the installation process, this usually rarely happens.remind:1. This wall switch does not have 433MHZ. Cannot pair with wireless switch panel.2. The switching power is 3~300W. If the lamp power exceeds 300W, please do no