Comprehensive Vehicle Coverage Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation. Insert the tire tool and lift the tire bead onto the mounting base. 3. Dismount the sensor: With a screwdriver, remove the fastening screw and sensor from the valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm using the positioning pin. Assemble the sensor body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, ensuring the valve is positioned at a 180-degree angle relative to the separation point. Mount the tire over the rim. Specification: Replace For Part Number: 529333V100O Color: Black Material: ABS Size: 7.5 x 6.5 x 3.5 cm Package Contents: 1 x Tire Pressure Sensor Note 1: No sensor programming required: The tire pressure sensor is and pre-programmed for your vehicle's make, model, and year. Activation is required using a scan tool or re-learning procedure. Simplified Relearn: Auto relearn installation of TPMS is recommended to be performed only by trained professionals. Only the above package content is included; other products are not included. Note: Lighting and different display settings may cause slight color variations between the item and the image. Measurement error is +/- 1-3 cm.