描述
Version selection:
only board : Individual drive board (does not include coaxial EDP cable same direction)
board W 40PIN CABLE : drive board + 0.5mm Spacing 40pin cable to 0.5mm Spacing 40pin cable for 40pin screen
board W 30PIN CABLE : drive board + 0.5mm Spacing 40pin cable to 0.5mm Spacing 30pin cable for 30pin screen
notice :
DP and tyce can only choose one signal , and switching between them simultaneously will result in an error.
screen larger than 15W, which is 17 inches can be powered USE 12V adapter.
cable only supports coaxial cable of 0.5MM 40PIN same direction
Support standard EDP screen, 2K 165HZ 2.5K 240HZ 4K 60HZ, 17.3 inches below can work
A function description:
Type-c 3.2 (Thunderbolt for short)
2. Do not remove or insert the EDP cable while the device is live. Otherwise, the screen may be damaged. If you want to remove the cable, you must first power off in order, all ports are removed, and finally unplug the EDP cable.
3.EDP40 coaxial signal output, DP port support 4K 120HZ, downward compatible, Thunder 4 interface support 4K 60HZ, 2.5K 165HZ, downward compatible.
B : performance parameters:
1. Working voltage 5V/QC15V protocol, compatible with USB Type-C PD3.0/3.1, automatic identification of charger fast charge protocol features, support 100W QC protocol power charger; Current 2~5A.
2. TYPE-C is the power input, supports QC protocol, DP/ Thunderbolt 4 is the signal input, and EDP40 is the signal output. It can support 40P to 30P screen wire conversion (2LAN for 30PIN and 4LAN for 40PIN). The default backlight voltage is 12V, and the drive logic voltage is 3.3V.
3. keystrokes: 50,000 times.
4. Operating temperature: -40-85&
8451;
6. EDP30 -- 2lan (40P to 30P switching screen cable) resolution is 1920*1080, EDP40 --, -4LAN supported resolution 1920*1080 300HZ 2560*1440 240HZ 3840* 2160,120 HZ, 5120*2880 60HZ backward compatible.
7. Supports the anti-adapter for reverse power supply to the phone, reserves 15W power for the screen when charging, and supports QC15V protocol fast charging.
9. Support key control volume and mute (SW1 dial switch)
supports
-
品牌:
Unbranded
-
类别:
笔记本屏幕
-
颜色:
Board w 30pin cable
-
Fruugo ID:
321805930-713752659
-
EAN:
819707400477
产品安全信息
请参阅下面列出的特定于该产品的产品安全信息
以下信息由销售该产品的独立第三方零售商提供。
产品安全标签
安全警告:
Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.
