Product Introduction: The highly integrated T3-1-2-H ultrasonic water meter is designed and manufactured strictly according to The highly integrated T3-1-2-H ultrasonic water meter is designed and manufactured strictly according to IS04064-1:2005, GB/T778.1-2007 etc., based on ultrasound transit-time measurement technology.  It's a new-style water meter specifically specifically designed for agricultural irrigation,garden management and water resource supervision. It is an all-plastic smart water meter with nylon as the main material. It is installed in the pipe by clamping the meter body which is only 50 mm in thickness between the two flanges of the pipe. The ultrasonic water meter uses a technology similar to that of FLEXIM company’s ultrasonic flowmeter. The transit time difference is obtained through correlation calculation of captured signal waveform, thus featuring high precision, low drift, anti-interference, stability and reliability. The smart water meter also uses a signal acquisition hardware with a dynamic range of 30dB, so it can resist medium scaling inside the pipe and is suitable for measurement of muddy water with sediments. Feature: *iP68: This series of products have the advantages of high measurement accuracy, low power consumption,stable and reliable work,and each component of thewater meter is designed in accordance with the iP68 standard. *Wide application:  It can be applied to all kinds of harsh working environment. It is a major innovation in water management technology in industries such a surban water supply,water resource management, agricultural irrigation, garden management,industrial production,and industrial automatic control. *Timing: Built-involume controller, built-in time accumulator. Automatically start the controller at a fixed time,and automatically supply water at a fixed time. Accumulate the flow in time-sharing with in the set time period to reach the gradientrate. *Independent measurement: no rotation,no moving parts,to ensure high long-term measurement accuracy. *Suitable for high-quality water varieties, including water containing grave land weeds. Technical Parameter: Flow Rate: Technical Parameter: Working pressure:2.5 MPa Temperature:T30 Working Environment:-25& 8451; to 55& 8451;, IP68 Protection Press Loss:ΔP63 Display Range: Multi-lines show 9-bit cumulative flow, 6-bit instantaneous flow, signal strength flow direction, error, communication status  Unit: m³, USG, Liter, cubic foot, Acre Feet Operating Mode:Two capacitive touch keys support sliding operation. Communication Interface:Physically independent RS485 and infrared interface. LORA/ NB-IOT, WIFI, USART are optional. Output: 2 way of OCT output is optional, can simulate dipulse output of mechanical water meter. Communication Protocol:MBUS, MODBUS, ASCII, CJ188 Power Supply:3.6V 4Ah lithium battery (battery life>10 years). It will operate power save functions when there is no water and flow in pipe DC12-30V external power supply through MBUS interface; data will be permanently saved after power off. Power consumption: <0.