Features: 1. Designed for easy installation of most fork seals, simple to operate. 2. Carbon steel structure, split design, heavy duty, more practical to use. 3. 1.5–2 inch adjustable seal range, fits most traditional or inverted forks. 4. Easy to install and convenient to use; compatible with most fork seal replacements. 5. Built to meet standard specifications, strictly following factory quality control. Specification: Condition: Item Type: Fork Seals Driver Material: Carbon Steel Use: 1. Disassemble the fork. 2. Remove the old sealing ring. 3. Check whether the fork tube is damaged or stained. 4. Apply new fork oil to the inner surface of the new seal. Position the seal at the top of the fork tube and align it with the slider. 5. Loosen the three Phillips screws to adjust the diameter, and modify the plastic joint to match the seal size. 6. Press the adapter onto the seal and move the driver tool up and down until the seal is fully seated in the slider. Package List: 1 Set of Fork Oil Seals Driver Tool 1 x Sealing Ring