Universal Rear View Camera for Compact and Mid-Size Vehicles, Compatible with Multiple Models

Car Rear View Camera for Peugeot 206 207 307 306 308 406 407 5008 Partner TepeeCompatibility (For Reference): 2001–2008 Peugeot 206 2D CC 2001–2008 Peugeot 206 4D Sedan 2001–2008 Peugeot 206 3D/5D Hatchback 2001–2008 Peugeot 206 5D SW (Station Wagon) 2008–2014 Peugeot 207 2D CC 2008–2014 Peugeot 207 3D/5D Hatchback 2008–2014 Peugeot 207 5D SW (Station Wagon) 2003–2010 Peugeot 306 5D SW (Station Wagon) 2003–2010 Peugeot 307 4D Sedan 2003–2010 Peugeot 307 5D SW (Station Wagon) 2003–2010 Peugeot 308 2D CC 2003–2010 Peugeot 308 5D SW (Station Wagon) 2006–2008 Peugeot 406 5D SW (Station Wagon) 2006–2008 Peugeot 407 5D SW (Station Wagon) 2006–2008 Peugeot 5008 5D MPV 2006–2008 Peugeot Partner (M59) (B9) (M49) 2006–2008 Peugeot Partner Tepee (B9)Specifications: Image Sensor: CCD Effective Pixels: NTSC 512 (H) x 492 (V) Horizontal Resolution: 420 TVL Minimum Illumination: 1.0 Lux F=1.2 (0 Lux with IR on) Night Vision Distance: 5–10 meters Lens: 2.8 mm Diagonal Viewing Angle: 120 degrees (optional) Synchronization: Internal Signal to Noise Ratio: >48 dB Signal System: NTSC Electronic Shutter: Auto Video Output: RCA interface, 1.0 Vp-p, 75 Ohm White Balance: Auto Backlight Compensation: Auto Power Supply: DC 12 V Current Consumption: 50–60 mA, Max 130 mA with IR on Operating Temperature: -20°C to +60°C, RH95% Max Storage Temperature: -30°C to +80°C, RH95% Max Video Cable Length: 6 m Power Cable Length: 1 mFeatures: Supports night vision with infrared Equipped with CCD imaging sensor Compatible with NTSC video system High-definition image quality with wide viewing angle Suitable for various vehicles including cars, trucks, RVs, and minivans Easy installation with included cables and standard connectionsPackage Contents: 1 x Rear View Camera 1 x 6m Video Cable 1 x 1m Power CableInstallation Tips: Remove the original license plate light at the rear of the vehicle Mount the camera in the same location as the original license plate light Connect the camera’s built-in license plate light to the original wiring for power Connect the camera power wires: red wire to reverse light positive, black wire to negative Connect the video cable to the monitor using the included extension if needed The camera activates automatically when the vehicle is shifted into reverse gear