New Arrival For BMW INPA K+CAN With FT232RL Chip with Switch, compatible with BMW vehicles with 8-pin connector and K-LINE protocol. USB OBD2 interface for BMW - INPA/Ediabas - K+DCAN enables full diagnostic functionality for BMW models from 1998 to 2013 (all functions comparable to OEM tools). Built-in K and D-CAN lines. INPA K+CAN for BMW Features: 1. Read and clear fault codes 2. Perform adaptations 3. Driver programming 4. Apply coding 5. Additional diagnostic functions INPA K+CAN for BMW Supports the Following Protocols: 1. High-speed D-CAN and PT-CAN (500 kbit/s) 2. Low-speed K-CAN (100 kbit/s) 3. Standard BMW OBD protocol Supported Vehicle Models: - E60, E61 from 03/2007 - E83 from 09/2006 - E81, E87 from 03/2007 - E90, E91, E92, E93 from 03/2007 - E70 (newer X5 models) - R56 (newer MINI models) PT-CAN and K-CAN with fully switchable CAN speed, enabling diagnostics without vehicle connection. Compatible with Older BMW Models: - From 1995 to 1998 (K-line not required) - From 1998 to 03/2013 (all models) Package Includes: 1 x K+CAN for BMW INPA Cable with Switch 1 x CD with Drivers