Product Introduction: MKS CANable V2.0 module is an upgraded version of MKS CANable V1.0. CANable 2.0 is a small, low-cost, open-source USB to CAN analyzer. CANable enumerates as a virtual serial port on your computer and acts as a serial line for the CAN bus interface. CANable 2.0 supports standard CAN 2.0A, CAN 2.0B, and CAN FD.With high-speed transmission rate and high operational stability, the MKS CANable V2.0 Pro module offers enhanced anti-interference capability, making it suitable for industrial debugging or motor field applications.When using the candleLight firmware, CAN is enumerated as a native CAN interface on Linux.The CANable analyzer is compatible with ARM-based embedded platforms such as Raspberry Pi, Raspberry Pi Zero, ODROID, BeagleBone, etc., making it ideal for integration into products.Product Features:1. Supports CAN 2.0A, CAN 2.0B, baud rate up to 1M;2. Supports candleLight and slcan firmware; slcan supports CAN-FD with test rates up to 2M/5M baud rate;3. Terminal resistor can be selectively enabled or disabled via jumper cap;4. Supports Type-C USB interface, online firmware upgrade, and DFU mode firmware upgrade;5. Uses high-performance ARM Cortex-M4 STM32G431C8T6 processor, operating frequency up to 170MHz;6. Schematic diagram, firmware, source code, and host software provided; complete documentation for easy use.Analyzer Board Version: V2.0 / V2.0 Pro Material: ABS Color: As Shown Package Contents: 1 x USB data cable 1 x 3-pin double Dupont cable 1 x Analyzer board Note: Light reflection and different displays may cause slight color differences between the image and actual item. Measurement error allowed is +/- 1-3 cm.