Description: The movement shell uses ABS environmentally friendly materials, and the movements are equipped with nuts and washers. Long spindle clock, good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs. Movement size: Shaft length is 31mm; Thread length is 24mm; Suitable for 20mm thickness clock panel. Hour hand is 145.5mm; minute hand is 207mm; which is suitable for wall clocks with a diameter of 430mm-600mm. Wide application: you can enable to use it to repair, replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, etc. Specification: Material: Plastic + Metal Size: 56 x 56 x 16mm/2.2 x 2.2 x 0.62in Thread: 24mm/0.94in Hour Hand: 145.5mm/5.72in Minute Hand: 207mm/8.14mm Operating Voltage: 1.3V to 1.7V Rated Voltage: 1.5V Operating Temperature: -10℃ to 50℃ Package Includes: 1 x Quartz Clock Movement 1 x Second Close Nut 1 x Minute Hand 1 x Hour Hand 1 x Plastic Washer 1 x Brass Washer 1 x Brass Nut 1 x Hook Note: Due to the light and screen difference, the item's color may be slightly different from the pictures. Please allow 1-3mm differences due to manual measurement.