1、The wind pressure transmitter has high sensitivity, high accuracy and strong anti‑overload capability. 2、The sensor and amplifier circuit are highly integrated, with strong anti‑interference ability, long‑term stability and reliability. 3、Using die‑cast aluminum alloy, the 0 point and accuracy of the circuit board do not need to be adjusted. 4、Using a unique stress isolation technology, the signal of the measured medium can be converted into a 4-20mA output signal. 5、Small size, easy to carry and store, convenient to use and with good performance. 1 x Wind Pressure Transmitter Item Type: Wind Pressure TransmitterMaterial: Aluminum alloyMeasuring Medium: Non-corrosive gasOverload Capacity: Single-ended minimum withstand voltage 4Kpa, maximum withstand voltage can not exceed 25 times the rangeMeasurement Accuracy: 0.2%FSOutput Signal: 4~20mAPower Supply: DC24VWire Length: Approx. 50cm / 19.7inPagoda Mouth Diameter: Approx. 8mm / 0.3inTemperature Drift: ± 0.1%FS/℃Ambient Temperature: -30℃~+80℃Environmental Humidity: ≤85%RHApplicable Environment: Widely used in pressure measurement in clean rooms, boilers, dust collectors, vacuum cleaners, power plants, air conditioners, etc.Size: Approx. 60mm / 2.4in51mm / 2in45mm / 1.8in20mm / 0.8in64mm / 2.5in4mm / 0.2in40mm / 1.6in35mm / 1.4in30mm / 1.2in10mm / 0.4in 1.5mm / 0.1in  Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.