Window Cleaner Robot 5600Pa Suction Smart Glass Cleaner Robot Automatic Robot Window Washer for Home Office Building Beauty Salon US Plug Item Type: Automatic Window Cleaning Robot Material: ABS Built in Battery: Lithium ion Battery 650mAH Remote Control Battery: 2 x AAA Battery (not included) Rated Supply: 72W UPS Operating Time: Approx. 20min Cleaning Speed: Approx. 4min/㎡ Maximum Working Window Size: Approx. 6 x 4m / 19.7 x 13.1ft Minimum Working Window Size: Approx. 0.35 x 0.35m / 1.1 x 1.1ft Suction Supply: 5600 Pa Automatic Cleaning Modes: 3 Application: for Home, Beauty Salon, Office Building, Shop, Club, etc. Description: This is a window glass cleaning robot. It has a vacuum motor that allows the robot to adhere to the glass surface and move freely on vertical glass surfaces. It features an uninterruptible Supply supply system (UPS) to provide Supply during Supply outages, preventing falls. The window cleaning robot has two cleaning wheels with suction, movement, and cleaning functions. The cleaning wheels can adhere and move on vertical glass surfaces. The cleaning pads on the cleaning wheels are easy to remove, replace, clean, and reuse. The cleaning pads are made of fine fibers cloth, providing excellent cleaning results. The robot is equipped with artificial intelligence (AI) to plan routes and automatically detect window frames. It has automatic cleaning mode and manual cleaning mode, giving users full control over the robot. How e 1. Make sure the robot is fully charged before use (LED green light on). When charging the built in battery, turn off the switch and connect the Supply adapter. Orange light indicates charging mode, green light indicates full charge. 2. Check if the security rope and buckle are damaged. Be sure to fasten the security rope before use and secure it to a fixed fixture at home. 3. Before use, ensure that the cleaning ring is fixed on the cleaning wheel to ensure good vacuum suction of the robot, and spray cleaning water as required. 4. When the window cleaning robot is working, it must be connected to the Supply adapter to function properly. 5. Plug in the Supply adapter, turn on the robot (blue LED) and make sure the motor is working. Then attach the robot to the glass, about 10cm away from the frame (for self check). 6. Ensure the robot is firmly fixed on the glass and that the security rope and Supply cord do not obstruct the robot's cleaning route. 7. Press the automatic cleaning button on the remote control, the robot will move from the bottom to the top of the window, then move in a zigzag pattern, cleaning the window from left to right and top to bottom. After cleaning, the robot will return to the starting position at the bottom and make a "beep" sound. 8. If the robot accidentally stops in a hard to access place, gently pull it back with the security rope. 9. When disassembling the robot, please hold the security rope with one hand and remove the robot with the other hand, then turn off the power.