This is a single outlet washer pump designed for windshield cleaning. The washer pump is located at the bottom of the washer bottle, typically positioned low on the vehicle. Access to the washer pump may require partial removal of the inner wheel arch or bumper trim. The pump is push-fitted into the washer bottle. Washer pipes are push-fitted onto the pump; some may have a release clip. If the pipes are difficult to remove, gently heating them with a hair dryer can ease removal. Avoid operating the washer pump dry, as this may cause damage. Use windshield washer fluid according to manufacturer recommendations to help prevent freezing. Do not add antifreeze to the washer bottle. Always add windshield washer fluid first, then top up with water if needed. Item Specifications: Condition: New Manufacturer Part Number: 76846-TA0-A01, 76846-TA0-A01 Interchange Part Number: 76846TA0A01 Type: Windshield Washer Pump Fitment Type: Direct Replacement Voltage: 12V Connector: 2 Pins Fit for: Accord 20082011 (For Japan Only) 2012 (For Japan Only) TSX 20092013 (For Japan Only) Color: White Material: Plastic Package Contents: 1 x Pump 1 x Rubber Grommet Note: Light reflection and differences in display settings may cause slight variations between the color of the item in the image and the actual product. Measurement may vary by +/- 13 cm.